Static Routes in IPv6
Figure 25-3 illustrates the network topology for the configuration that follows, which shows how to configure static routes with IPv6. Note that only the static routes on the Austin router are displayed.
![Figure 25-3](/content/images/chap25_9781587201936/elementLinks/thpc042503.gif)
Figure 25-3 Network Topology for IPv6 Static Route Configuration
Austin(config)#ipv6 route 2001:db8:c18:3::/64 2001:db8:c18:2::2/64 |
Creates a static route configured to send all packets to a next-hop address of 2001:db8:c18:2::2 |
Austin(config)#ipv6 route 2001:db8:c18:3::/64 fastethernet 0/0 |
Creates a directly attached static route configured to send packets out interface fastethernet 0/0 |
Austin(config)#ipv6 route 2001:db8:c18:3::/64 fastethernet 0/0 2001:db8:c18:2::2 |
Creates a fully specified static route on a broadcast interface |