Review Questions
- What does the command ip unnumbered gigabit ethernet 0/0/0
accomplish?
- It enables IP on the interface without assigning a specific IP address.
- It selects the authentication protocol and an optional secondary protocol.
- It associates a virtual template with a virtual template interface.
- It specifies a dynamic IP address assignment method, from either an IP address pool or a DHCP server.
- Which of the following apply to the NRP?
- Layer 3 services
- High-speed ATM switch
- Central control for the 6400
- Traffic shaping
- Which of the following apply to the NSP?
- Central control of the 6400
- Layer 3 packet services
- Terminates PPP
- End-to-end transport authentication
- Which of the following apply to the NLC?
- Optical interface
- Automatic protection switching
- Layer 3 services
- Terminates PPP
- True or false: The 6400 must be configured with redundant NSP cards.
- The IP address for the subscriber's PC can be provided by what?
(Select all that apply.)
- Static configuration
- DHCP server on the ATU-R
- DHCP server on the aggregation router
- DHCP server on the RADIUS server
- The interface designation int atm 0/0/0 on the 6400 designates what?
- ATM interface slot 0, subslot 0, card 0
- Backplane connection, subslot 0, port 0
- ATM interface port 0, subslot 0, slot 0
- ATM interface slot 0, port 0, subslot 0
- From the NSP, interface designation atm 1/0/0 indicates what?
- Interface to the card in port 1, subslot 0, slot 0
- Interface to the card in slot 1, subslot 0, card 0
- Interface to the card in slot 1, subslot 0, port 0
- Interface to the card in slot 1, card 0, port 0
- What is the NSP switch default ATM protocol?
- LAPD
- X.25
- UNI 4.0
- ISDN
- Which of the following best describes a BVI?
- It provides the interface between a bridge group and the routed network.
- It assembles packets coming from the bridge group into FR frames.
- It restricts broadcast messages within a bridge group.
- None of the above
- Which of the following best describes SONET APS on the 6400
system?
- Redundant NLC cards supplying OC-3 traffic to the NSP.
- Redundant NLC ports supplying OC-3 traffic to the NRP.
- The 6400 system does not support SONET APS.
- Redundant NSP configured for failover.
- ilmi-pvc-discovery refers to the process of what?
- The automatic discovery of configured PVCs on the NRP card
- The automatic discovery of configured PVCs on the NLC card by the NRP card
- The automatic discovery of configured PVCs on the NSP card by the NRP card
- None of the above
- When two NRP-1s are configured in a redundant configuration, which of
the following occurs?
- Both NRP-1s provide redundant traffic to the NSP.
- Both NRP-1s provide redundant traffic to the NLC.
- Both NRP-1s provide redundant traffic to the NPP.
- None of the above
- True or false: The function of the encapsulation aal5mux ppp dialer command is to specify the encapsulation type for the PPPoA PVC on the 827.
- Which protocol contains information about higher-layer protocols,
including IP and IPX, and their control protocols (IPCP for IP)?
- NCP
- LLC
- PCP
- NLP