Command Summary
Table 4-4 provides a list and description of the commands discussed in this chapter
Table 4-4 Command Summary
|
Command |
Description |
|
clear ip nat translations {* | [inside [tcp {inside [global-ip [global-port] local-ip [local-port]} | udp {inside[global-ip [global-port] local-ip [local-port]}] | [inside global-ip local-ip][outside local-ip global-ip] |
Clears dynamic entries from the NAT table. |
|
ip nat {inside | outside} |
Designates the inside and outside interfaces; traffic originating from or destined for the interface is examined by the NAT. |
|
ip nat inside destination list {access-list-number|name} pool name |
Enables translation of inside destination addresses. |
|
ip nat inside source {list {access-list-number|name} pool name [overload] | static local-ip global-ip} |
Enables translation of inside source addresses. |
|
ip nat outside source {list {access-list-number|name} pool name | static global-ip local-ip} |
Enables translation of outside source addresses. |
|
ip nat pool name start-ip end-ip {netmask netmask | prefix-length prefix-length} type {rotary | match-host} |
Defines a pool of addresses to be used for address translation. |
|
ip nat translation max-entries entries |
Sets a limit on the number of entries allowed in the NAT table. |
|
ip nat translation {timeout | udp-timeout | dns-timeout | tcp-timeout | finrst-timeout | icmp-timeout | syn-timeout | port-timeout{tcp | udp}} seconds |
Changes the default period after which a dynamic entry is removed from the NAT table and the address is returned to the pool. |
|
show ip nat statistics |
Displays NAT statistics. |
|
show ip nat translations [verbose] |
Displays the NAT table. |