Home > Articles > Cisco Certification > CCIE > CCIE Security Practice Labs

CCIE Security Practice Labs

  • Sample Chapter is provided courtesy of Cisco Press.
  • Date: Mar 26, 2004.

Section 3.0: ISDN Configuration (8 points)

3.1: Basic ISDN (4 points)

  1. Configure ISDN on R1 and R3. Use network 31.31.31.0/24. Advertise this network in OSPF area0.

  2. ISDN information:

    BRI number on R3 is 99281766
    BRI number on R1 is 99281764
    Switch-type = basic-ts013
  3. Configure redundancy such that if there is a change in backbone database on R3, BRI comes up and all traffic continues normally.

3.2: PPP Callback (4 points)

  1. R1 should call back R3 using Tacacs+. Configure static NAT translation on PIX for AAA server behind R6 to achieve this task, as shown in topology diagram Figure 1-1.

7. Section 4.0: PIX Configuration (5 points) | Next Section Previous Section

Cisco Press Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from Cisco Press and its family of brands. I can unsubscribe at any time.