Summary
You have now successfully completed the configuration of the terminal server. Table 4-1 summarizes the commands to maneuver between the terminal server and the lab routers, as well as manage reverse Telnet connections on the terminal server.
Table 4-1 Chapter Command Summary
Command |
Purpose |
show sessions |
Displays all open sessions |
disconnect connection # |
Disconnects the desired connection |
clear line line # |
Clears the desired asynchronous line (1 to 16, where 1 = 2001, 2 = 2002 and so on) |
Ctrl-Shift-6, x |
Escapes the current session and returns to the terminal server |
line 1 16 |
Enters line configuration mode for asynchronous lines 1 through 16 on the terminal server |
line vty 0 4 |
Enters line configuration mode for vty lines 0 through 4 |
transport input protocol |
Defines what protocols are allowed across the asynchronous or vty lines |
ip host [hostname] [port] [ip-address] |
Adds an entry to the IP host name table |
Copy running-config startup-config |
Copies the running configuration to the startup configuration |